| Need
To Know
Made
from water resistant, sustainably sourced European beech wood.
Supplied untreated they are good to go or can be stained or
painted if required
The
angle of the panels allows space for the air to circulate and
for the laundry to dry. Each panel can be lowered to a maximum
of 90 degrees for loading and unloading and raised again to
save space
A
peg holds the panels in place when not in use. This fits through
the top of the frame for a single unit, and through the centre
for a double unit
More
than one unit can be placed side by side, turning a single unit
into a double or triple to meet your laundry requirements. Garments
can be hung on coat hangers, larger items such as bed sheets
can be placed across the top of the panels
Each
panel can hold a maximum of 10kg in weight, more than enough
for a full load of laundry
Sizes
For Any Space
Single
Beadboard Slim (48cm Wide / 108cm Tall) A single panel
drying rack with an internal drying width of 42cm, ideal for
smaller spaces and laundry loads.
Single
Beadboard Wide (75cm Wide / 108cm Tall) A single panel
drying rack offering an internal drying space of 65cm, ideal
for larger items of laundry, or for two or more smaller items
to be placed side by side, providing more overall capacity.
Double
Beadboard Compact (108cm Wide / 75cm Tall) A double
panel drying rack shorter in hight than our original double
beadboard. Beautifully proportioned it takes up less space on
the wall. Each panel has an internal drying width of 42cm.
Double
Beadboard Large (108cm Wide / 108cm Tall) Our original
beadbord drying rack offering the largest capacity of drying
space. Each panel has an internal drying with of 42cm.
Delivered
fully assembled, each of our beadboards is supplied with a peg,
four wooden rope washers, two ropes and screws and raw plugs
as needed.
|
